New Member from P.E.I.

[Alfred Dunphy]

I own a 2003 Mach1. I bought the car new ordered from the factory through Fairisle Ford here in Charlottetown. It was the only Mach1 allocated to this dealer. I just put the Mach1 away for the winter having just turned 11,000 km. I don't take the car out in the rain and it gets most of its driving on fine weekends and to a few car shows in the Maritime area. This past spring before taking the Mach1 out of winter storage I removed all four wheels for the first time. I removed the calipers and rotors and cleaned any surface oxidization present and then painted all unpainted steel parts with POR-15. The same was done with the differential housing and all factory markings were painted back on with the proper colors. When all work was done I rubbed everything down with Krown including the whole underside of the floor. I will post some photos later.
I just recently retired and will now have more time to spend on the Mach keeping it looking like factory new. Between now and next spring I hope to remove the trunk coverings inside and apply some Krown to the inner fender wells and any other nooks and crannies I can get at. I will also do the same to both doors. After all this work it should only take TLC and progressive maintenance to keep the Mach1 looking like new!

Al Dunphy

[mvasey]

Welcome Al and enjoy your retirement! Five years to go for me. Love that colour and love that car. 03/04 Mach 1 is still my favourite Mustang after the 03/04 Cobra.